Quadcept : Creating IPC Footprints

Fiducial Mark

Configure shapes for fiducial marks (marks that are set on the board in order to align the position between inserting equipment or placement equipment and the board for performing auto insertion and auto placement of components to printed circuit boards) such as BGAs and QFPs.

About Fiducial Mark Settings

 


Fiducial Mark Settings
Item Content

Pad Shape

For the fiducial mark Pad Shape, select either "Round" or "Rectangle".

Round Rectangle

 

Pad Size

You can configure the fiducial mark pad size settings.

Solder Resist Size

You can configure the fiducial mark solder resist size settings.

Angle

You can configure the fiducial mark angle settings.

Keep Out Area Size

You can configure the fiducial mark Keep Out Area size settings. A Keep Out Area is not created when "0" is input.

 


Displaying the Fiducial Mark Settings Screen
Configuring Fiducial Mark Settings
The following will explain how to configure fiducial mark settings.
(1) Select [Settings]
=> [Settings]
(2) Click "Fiducial Mark"
  The Fiducial Mark settings screen will open.