Schematic Capture : Wiring and Editing

About Wiring

Wiring refers to work for pin-to-pin Net connections by placing wire objects.

There are the following methods for wiring.

Wiring Method
Type Content

Wire

Wires can be created manually by specifying corners.
Detailed corner specification is possible, so it is possible to execute leading according to your desire.

* For those who want to view the video in a larger screen setting: https://youtu.be/jm9cJIa7u0A

Auto Wiring

By specifying the Start Point and End Point, you can perform auto wiring by avoiding obstacles such as components and wires.
Leading is done automatically, so wiring work can be done quickly.

Before Auto Wiring After Auto Wiring

* For those who want to view the video in a larger screen setting:https://youtu.be/6brA69PeG5I

Parallel Wire

Batch wiring can be done from parallel placed pins when connecting from a connector, IC, or FPGA, etc., to a bus.

* For those who want to view the video in a larger screen setting:

After wiring work is finished, use Schematic Verification (ERC/DRC) to confirm that there are no mistakes with the wiring.