Schematic Capture : Schematic Settings

BOM

Configure BOM settings. It is possible to select an attribute for displaying, and to set whether to group the same components.

For more details about opening the Schematic Settings screen, refer to About Schematic Settings.

BOM Screen


Setting Items

The following will explain details about BOM Settings.

Item Content

Attribute List

Configures settings for attributes displayed in the BOM.
Only items with a check on the left are shown in the BOM.
To edit, use by clicking [Add] or [Delete]. For more details, refer to Adding Attributes and Deleting Attributes.

Display Method

 ■ Show Unmounted Components
When this is checked, attributes that are set as Not Applicable for Export will be shown in the BOM.

■ Group the same Attributes
When this is checked, the BOM is displayed with the set attributes grouped.

You can select the grouping method from the following.

Item Content

Citation [R1, R2, R3, U1, U2]

Attribute values are cited and displayed.

Group [R1-3, U1-2]

Attributes are grouped and displayed.

 

 For more details about exporting BOMs, refer to Exporting BOMs.

 


Add Attribute
Adds attributes displayed in the BOM.
(1) Click "Add"
  => The "Add Attribute" screen will open.
(2) Select the attribute you want to add, and then click "OK".
* Or, you can add by double-clicking the attribute you want to add.
  * For more details about System Attributes such as Component Name, refer to System Attributes.

  The attribute will be added.

 


About System Attributes
System Attributes are attributes prepared by the system in advance.
Using System Attributes, it is possible to display information such as "Component Name" and "Reference".
To find out the contents of an attribute, hover the cursor and it will be displayed.
(1) From the Attribute List screen, click "Add".
  The "Add Attribute" screen will open.
(2) Place a check for "Show System Attributes".
  * By hovering the cursor, attribute contents will be displayed in the Tool Tip.
(3) Click "OK".

 


Delete Attribute
The following will explain how to delete an attribute displayed in the BOM.
(1) Select the attribute that you want to delete.
(2) Click "Delete".
  The selected attribute will be deleted.