Search Result 72 results

• Create NC Drill Chart (Auto) - PCB Layout CAD

  The Create NC Drill Chart (Auto) command is used to export drilling information including drill... drill chart export settings, see the NC Drill Chart page.

• Component Coordinates - PCB Layout CAD

  Export component position coordinates from the PCB for component mounting. You can select... for executing Component Coordinate Export... - Open a PCB document, [Project] => [Component Coordinate Export] => [Component Coordinate Export] - Batch Output

• Batch Output Settings - Quadcept

  ] => [Export] => [Batch Output] => [Batch Output

• Save Project As - Quadcept

  directory to export the project to

• ODB++ - PCB Layout CAD

  Display layer combinations for Export ODB++ can be registered. The... Export items for exporting ODB++ files can be set... Layer Display layer combinations for Export ODB++ can be registered. The checks on... Export contents for exporting ODB++ files... to the environment of the reading side. Export

• Extracting Projects from Quadcept Files(.qcom) - Converting Projects from v9 to v10

  . (3) Specify an export directory at Export Directory.... * The Save File button allows you to export the result list in CSV format

• OrCAD Conversion - Quadcept

  Forum. How to Do It in OrCAD (EDIF File Export... File => Export Design from... CAP2EDI(Quadcept).CFG as the configuration file, and then export

• Extracting Projects from Quadcept Database(.qdb) - Converting Projects from v9 to v10

  file-based. After updating Quadcept to the version 10, you will need to export your projects (v9 or... Earlier) from your QDB as project files(.qproj). There are two ways to export projects stored in a QDB... Quadcept Maintenance. For details on how to export the projects, please visit the

• Plane Styles (Mesh) - PCB Layout CAD

  ", for Gerber, export is done in G36, G37 (Polygon). There are the following..., export is done using Line Information. It is created by... cutting out a space in the plane. For Gerber, export is done in G36, G37 (Polygon

• Importing RTE Files - PCB Layout CAD

  . Export

• About Components - Quadcept

  components or place the components. It is possible to export Netlists even when symbols are placed directly.... It is possible to perform Export Gerber and Export ODB++ even when footprints are placed directly

• Extra: Configuring the Assembly Area and Height - Quadcept

  target for the Keep Out Area, which has a Height Limit. Height information is reflected for performing Export IDF.

• Import Ultra Librarian - Quadcept

  running the export to Quadcept in Ultra Librarian, a

• Gerber - PCB Layout CAD

  Export Gerber can be registered. The checks on the left toggle between Enabled/Invalid... Layer Display layer combinations for Export Gerber can be registered... the Export File Name can be set. The Board Name, date, etc., can be input... File shows the export format. Extension... There are the following methods for executing Export Gerber

• NC Drill - PCB Layout CAD

  . Prefix The prefix at the beginning of the Export... select how you export slot/square holes into NC drill files from "Center", "Both Ends... output a Report File. The Report File shows the Tool Table and export format... There are the following methods for executing Export NC Drill...] >> [Export NC Drill] - Batch Output

• Data Management - Quadcept Maintenance

  clean up a Quadcept database as well as export all the Quadcept... explains how to export all projects from a Quadcept database(QDB). From the Quadcept v10, Quadcept... projects are separated from a QDB and are file-based(*.qproj). With this command, you can export all of... "Export... export has been completed, a completion message will appear. Click "Yes" if you

• Drawing Attributes - Schematic Capture

  the component's "Export BOM". True/False... ExportNet Shows the component's "Export... Export, Export... Netlist, or Export IDF when exporting files... system in advance. This is used for Export, etc., and when using System Attributes, it is

• Assigning Footprints (Assigning PCB Components) - PCB Layout CAD

  . Import/Export Click this button to import / export a CSV-format file

• Annotation (Comparing Differences between New and Old Data) - Quadcept

  the differences. *By clicking "Save File", you can also export

• File Back Annotation - Schematic Capture

  "Sample File" button allows you to export a sample file available for... File Back Annotation. * You can export a sample file for "Reference

• Extra: Settings Components as Unmounted - Quadcept

  components as non-populated allows you to exclude the components when you export BOM files. In

• Aligning Routes - PCB Layout CAD

  export

• Creating a New Schematic Project - Schematic Capture

  has one or more schematics, and for creating BOMs and Netlists, export is done according to the

• Printing PCBs - PCB Layout CAD

  the Batch Output command, you can export multiple types of documents such as... work for PCBs such as Gerbers, NC Drills, NC Drill Lists, Component Coordinate Export, and Export BOM..., you can also execute PDF export... Configures printer settings for export targets. To print a PDF, select a PDF Writer

• Open - Quadcept

  export a list of objects or unlock the...". Output List Allows you to export the objects shown on the object list in... how to export the list, see here